NGL Chemicals

CERACLEAN SP
Liquid product used in ultrasonic processes to obtain a spot free finish on all surfaces, prior to hot air drying
 
Benefits:

• Efficient for finishing prior to hot air drying
• Removal of all kinds of organic residues
• Long bath life
• Brightening effect

GL 801 S
Neutral liquid used to remove fingerprints and organic residues from mineral lenses in precision optics.

PRECIOPTIC 18.22
For the removal of cerium oxide, fingerprints, and organic residues on precision optics in ultrasonic processes.

OPTICAL V
Highly alkaline liquid, used in ultrasonic processes to remove aluminium oxide, cerium oxide, marking inks, fingerprints, varnishes and adhesive residues.

ALLSTRIP
Universal NEP-free solvent used in ultrasonic processes to quickly eliminate glues, polishes, waxes, dyes and monomer residues.

Benefits

• Does not contain NEP
• Eliminates all organic residues (glue, wax, varnish, etc.

STRIPCOAT AR
Silica and multilayered AR coatings stripper for metals and organic lenses

Benefits

• It can be easily rinsed off
• Alternative to sandblasting of the PVD/CVD mounts and frames
• Removal of sandblasting residue on silica basis
• Does not attack the organic substrates (Polycarbonate, CR39, high index etc.

OPTICAL 2010
Strongly alkaline powder, used in ultrasonic processes, for surface conditioning prior to hard-coating.

CEROWEG EXTRA
Concentrated and strong alkaline detergent for ultrasonic cleaning and surface preparation prior to hard coating and AR coating.

RODAWEG 2018
Liquid product, highly alkaline, for the total and rapid removal of residues from grinding compounds, oils and light grease, in ultrasonic processes.

HELIT
Neutral liquid product, for ultrasonic processes, to remove light oils, polishing compounds and finger prints
 
Benefits:

• Perfectly suited for watch parts, jewellery, silverware, orthopaedic items
• Disperses contaminants
• Excellent emulsifying and dissolving of greasy substances
• Perfect degreasing of parts and

GALVEX 18.01
Lightly alkaline liquid, used in ultrasonic or immersion processes.

GALVEX 20.01
Universal degreaser, used in ultrasonic processes, for the removal of polishing compounds and light oils.

GALVEX 20.

DECOMET
Slightly acidic liquid product, used for finishing and passivation of metals in the medical sector, for ultrasonic tanks.

DECOCLEAN 440
Strong alkaline liquid for ultrasonic and spray cleaning of stainless steel.

PANTALOX 42 CC
Decoating of PVD/CVD holders and charging equipment, specially for tungsten carbide scrap decoating.

FERRODEC 56
Powder based product specially designed for the total stripping of aluminium and titanium-based layers.

EXCARBONITE 222
Powder based product specially designed for the decoating of CR and SI layers.

UNICERAL 308
For the complete stripping of titanium, aluminium and zirconium PVD coatings, especially dedicated for carbide tools.

KORROSTOP 5000
Anticorrosion additive for the protection of sensitive steel following an aqueous cleaning process.

NGL 17.40 P. SP
Lightly alkaline powder, used for particular decontamination of surfaces, in ultrasonic processes.

RODACLEAN 2018
A highly alkaline liquid product for removing oil or polishing compound residues in ultrasonic processes.

VACUKLEEN 440
Highly alkaline and non-foaming liquid product, used in ultrasonic and spray processes for the total and rapid removal of oil and polishing compounds.

Benefits:

• Excellent preparation of surfaces prior to vacuum metallisation (P.V.

Liquid acidic product used for deoxidation, neutralization, and activation of surfaces prior to vacuum or electrolytic plating in ultrasonic processes.